ROBBE SAFETY SWITCH

The safety switch is turned on using the machanical switch, and bridged internally by means of an electronic switch contact.
This means that problems, such as vibration, soiling etc...
An LED glows to indicate that power is switched on.
Specification ;
input : 4/5 cells NiCd / NiMh
Load : 5 Amps
Dimensions : 34,5 x 15,5 x 12 mm
Weight : 14 gr

5A SWITCH

Specification
Switch with DSC (direst servos control)
Operating voltage 4,8/6V (4 or 5 cells)
Continuous current : 5A
Integrate DSC and charge socket
Dimensions : 34,5 x 15,5 x 15 mm
Weight : 16 g

FREQUENCY CHECKER 41 MHZ

Dimension : 80 x 60 x 20 mm
Poids : 66 g

INTERFACE FMS FICHE JR/GRP PORT COM

Câble de liaison PC/radiocommande JR/GRAUPNER. Compatible Windows 95/98/NT/2000/XP

CORDON ECOLAGE 9C

Cordon écolage pour radio Futaba nouvelle génération

CORDON USB PC POUR RECEIVER RX-SYNT

For connect MULTIPLEX RX SYNTH receiver (no RX-6 SYNTH) to a PC.
You can dowload RX-SYNTH DataManager at www.multiplex-rc.de for more possibility.

CORDON USB PC FOR RADIO MULTIPLEX

Many of today’s PCs and notebooks are only equipped with USB ports (instead of serial ports). For this reason we now offer a future-proof USB variant of the previous PC cable for transmitters, suitable for use with the ROYALevo and future radio control systems. The cable is required, for example, to connect the ROYALevo to a PC or laptop for updating or exchanging data. The PC software required for this (ROYALevo DataManager) is available for downloading from www.multiplexrc.de.

Notes:
• If you wish to operate the ROYALevo with the new USB PC cable, you will need ROYALevo DataManager V 1.90 or later.
• The USB PC cable, is not suitable for older transmitters
(COCKPIT MM, PROFI mc 4000).
• The USB PC cable, is not suitable for fl ight simulator use.

CORDON USB POUR RADIO MULTIPLEX

Free simulator on website :
http://fms.modelisme.com/

CHANNEL CHECK MODUL 41MHZ

Power-on guard: Channel-Check.This is one option you really should include, because:If your channel is free, the LED glows green and the transmitter starts transmitting. If your channel is in use or suffering interference, the LED glows red and the transmitter does not transmit a signal.
The Channel-Check module is simply plugged into the RF module for Pico, Cockpit, Profi MC 3030(HFM3), Royal evo (HFM4).With Channel-Check you can be certain that your channel is vacant when you switch on!

230V CHARGER FOR TX/RX MPX

Wall charger for MPX transmitter and receiver battery.
Tx/Rx 150 mA charge.