You are here : Home
     Login
     Password

Planes/sailplanes

Helicopters

NPM Kits
HURRICANE 550 EP



HURRICANE 550 EP GAUI

The Lightest-weight medium-sized EP helicopter.(Gas power 30 ~ 46 class)
Flying weight 1950g.
1000W(KV800) external brushless motor , 50A(25V) ESC and BEC are all included in kit.
The best power to weight ratio gives excellent 3D capability .
The cheapest battery cost.( 2 packs 3S1P in series, even your stock batteries for 450 EP heli work fine)
Multi-stage gear reduction system results in a streamline cabin and canopy.
Push-pull linkages on ECCPM system limits any play for sharp control response.
Dupont plastic and fiberglass composite main frame.
Precision CNC anodized aluminum swash plate.
Fully equipped ball bearings.(43 bearings)
Seesaw head with bell-hiller system.
Only a short time needed for completion. (90% factory assembled)
Belt driven tail rotor.
Extensive CNC upgrade parts and option parts available.
Specification:
Overall length: 1060mm (including cabin & canopy)
Main rotor diameter: 1110mm
Main blade length: 475~550mm
Tail rotor diameter: 222mm
Flybar paddle: 84*45*6mm
Tail blade length: 80mm
Overall height: 305 mm
Overall width: 85 mm
Motor: KV800 external brushless motor (included)
ESC: 50A/25V (ESC included)
Flying weight: 1950g (It may vary according to size of a battery pack and R/C gears.)
Main rotor blades: wooden 500mm(included) or fiber(option)
Flying duration: 6~8 minutes with 11.1v/2200mah Li-Po battery 2 packs in series(22.2v)
270.HUR550
290 €
MD500 DXL



CARBOON MD500 DX-L

Carbooon DX-L
BMI brings you a new concept in dual-axis helicopters with this Large scale Carbooon DX-L. This
revolutionary model sets a new standard in the dual-axishelicopter category. This supersize helicopter with it´s huge 450mm diameter rotorblades is able to fly Indoor and even Outdoors when there is little wind.
Because the Carbooon DX-L is bigger, it is more stable than it´s smaller counterparts. You will be amazed by it´s super stable flight characteristics.
The Carbooon DX-L has a symmetrical chassis with the drive motors immediately behind the main axle to optimise the centre of gravity. The servos are positioned immediately in front of the main axle. Because the Carbooon DX-L is a bigger helicopter, it is also easier to work on. Basic maintenance is quite easy and faster to undertake then on a smaller sized helicopter.
The Carbooon DX-L is powered by two 370 size motors which give it great power while assuring a flight time of 10 minutes with the included 1000mAh LiPo battery.
Technical features
Wide and sturdy landing gear.
Technical specifications
Tx/Rx, '3in1' Controller, 2xServo, LiPo battery & LiPo Charger, Adapter AC/DC 240V
System Dual Axis
Motor 2 x 370 size
Diameter 450 mm
Length 450 mm
Weight 350 g
Tx 4Ch
Rx 6Ch
Controlbox '3in1' (35 MHz)
LiPo 7,4V/1000mAh
Fly time e 10~12 min.
• Factory-assembled and test-flown Ready to Fly scale RC Helicopter.
• High quality electric helicopter with dual-axis rotors.
• Capable of hovering flight, backwards flight, sideways flight and pirouettes. Ideal to practise target landings!
• Symmetrical chassis with front mounted drive motors enables an optimised centre of gravity.
• The 370 size drive motors give tremendous power. 4 channel FM digital transmitter.
• Separate 6 channel FM receiver which can be used for other models.
• 3in1 control unit with speed controller, mixer and gyro.
• Realistic and detailed fuselage.
• Electronics and mechanical parts are easily accessible for
160.0360.000
169 €
APACHE AH-64 INDOOR



MICRO HELICOPTERE APACHE AH-64 BMI INDOOR MODE 1

The AH-64 Apache is the United States Army’s principal attack helicopter, and is the successor to the AH-1 Cobra. The Apache is a double seated helicopter (Co-pilot in front, Pilot in the back). Two turbines of 1660 HP each can power the helicopter to horizontal speeds of 365Km/h.

This R/C version of the Apache is an electric helicopter with two co-axial counter rotating Rotors. Thanks to it’s many details like the landing gear with wheels, bombs and rocket, this Apache Combat really stands out of the crowd. The Apache is based on the same mechanics as the “Swiss Lama v7.1” and has the same stable flight characteristics. The Apache shares most of it’s spare parts with the Swiss Lama.
Technical specifications
Charger Yes
Controlbox 4in1
Diameter Rotor 340 mm
Fly Time 8~12 min.
In-/Outdoor Indoor
Length 370 mm
LiPo cell(s) 7,4V 1000
Model Apache Combat 7.1 compl. set
Motor 180SHX (x2)
Servo(s) 2
System FP
System Co-axial
Tx RC-4
Weight 210 g
160.0321.000A
145 €
SWASH PLATE 47G GRP



SWASH PLATE SET BELL 47G GRP

010.4491.05
18 €
LIPO 2S/1P 1000MA LAMA



LIPO 2S/1P 1000MA SWISS LAMA BMI

160.0320.047
29.9 €
LAMA MOTOR 2 SET



SWISS LAMA MOTOR 2 SET

160.0320.033
6.4 €
LAMA MOTOR 1SET



SWISS LAMA MOTOR 1 SET

160.0320.032
6.4 €
STABILIZER SET LAMA



STABILISAER SET SWISS LAMA

160.0320.028
13.8 €
CABIN LAMA



CABIN SWISS LAMA

160.0320.021
9.2 €
BATTERY CASE LAMA



BATTERY CASE SWISS LAMA BMI

160.0320.010
4.6 €
TAIL BOOM SET LAMA



TAIL BOOM SET SWISS LAMA BMI

160.0320.007
13.8 €
UPPER BLADES HOLDER LAMA



UPPER BLADES OLDER SWISS LAMA BMI

160.0320.003
4.6 €
LOWER BLADES HOLDER



LOWER BLADES HOLDER SWISS LA MA BMI

160.0320.002
4.6 €
EXT MAST SET+ GEAR SET



EXTERIOR MAST SET+GEAR SET SWISS LAMA BMI

160.0320.040
19.9 €
ROTOR HEAD SET LAMA



ROTOR HEAD SET SWISH LAMA

160.0320.035
7.4 €
SWASH PLATE SET LAMA



SWASH PLATE SET SWISS LAMA BMI

160.0320.023
18 €
LINKAGE BMI



LINKAGE STABILZER SWISS LAMA BMI

160.0320.022
1.5 €
UPPER GEAR BMI



UPPER GEAR SWISS LAMA

160.0320.017
5.6 €
UPPER BLADES B SET



UPPER BLADES SET B FOR SWISS LAMA BMI

160.0320.012
14.3 €
UPPER BLADES A SET



SET OF 4 UPPER BLADES A

160.0320.011
14.3 €
LANDING GEAR LAMA



LANDING GEAR SWISS LAMA BMI

160.0320.009
13.8 €
INDOOR SWISS LAMA



INDOOR SWISS LAMA BMI COMPLETE SET

NEW VERSION 7.0

The "micro SWISS LAMA indoor" miniature electric helicopter is a fully-featured, untethered model controlled using a four-function FM radio control system, and designed for indoor flying. The model features two co-axial contra-rotating rotors and therefore requires no tail rotor; its outstanding feature is its unsurpassed stability in the air. This means that it can be mastered quickly,and requires only a relatively short period of practice.
Pack contents
Completely factory-assembled model with decals applied, already test-flown; including motors, servos, speed controller, gyro, Li-Po battery and charger (12 V) with balance charge and FM transmitter.
1000 mAh battery for very long flights

Specifications :
Length : 380 mm
Height : 180 mm
Width : 100 mm
Main rotor : Ø 340 mm
Weight : 240 g
Radio : FM 4-channel
Power supply : Li-Po battery, 7.4 V / 1000 mAh with lipo balancer
160.0320.000B
145 €
JET RANGER BODY



JET RANGER SCALE BODY FOR BELL 47G

You want to change the look of your Bell 47G. This body fit perfectly to the original fuselage.
Very light Jet Ranger fuselage
Length : 420 mm
Height : 90 mm
Wigth : 80 mm
Weight : 35gr
160.0310.100
23 €
ACCUS LIPO BELL 47 G



ACCUS LIPO 2S/1P 800 MA BELL 47 G

160.0310.680
28.8 €
BELL 47 G B MOTOR



MOTOR B 180 + PIGNON 8D BELL 47 G

160.0310.502B
12.4 €
BELL 47 G A MOTOR



MOTOR A 180 + PIGNON 8D BELL 47 G

160.0310.502A
12.4 €
CABINE BELL 47 G



CABINE BELL 47 G

160.0310.065
11.4 €
BELL 47 G LANDING GEAR



BELL 47 G LANDING GEAR

160.0310.062
6.8 €
CHASSIS BELL 47 G



CHASSIS BELL 47 G

160.0310.061
6.8 €
AXE BELL 47 G



COURONNES ET AXE BELL 47 G

160.0310.060
17.2 €
AXE INTER. BELL 47 G



AXE INTERIEUR BELL 47 G

160.0310.058
8.6 €
PLATEAU BELL 47 G



PLATEAU CYCLIQUE BELL 47 G

160.0310.057
6.8 €
BELL 47 G BLADES



BLADES B BELL 47 G (6 PCS)

160.0310.055
14.3 €
BELL 47 G A BLADES



BLADES A BELL 47 G (6 PCS)

160.0310.054
14.3 €
BELL 47 G ROTOR



ROTOR HEAD BELL 47 G

160.0310.053
6.9 €
TETE DE ROTOR



TETE DE ROTOR PRINCIPAL (MICRO-MINI V2)

020.RC2043
10.6 €
PLATEAU CYCLIQUE



PLATEAU CYCLIQUE (MICRO-MINI V2)

020.RC2042
8.5 €
MINICOPTERE BATTERY



ACCUS DE PROPULSION NI-MH (MINICOPTER)

020.RC2033
23.5 €
TAIL ROTOR HOUSING



TAIL ROTOR HOUSING ZOOM 400

010.4441.47
12 €
TAIL ROTOR CONTROL



TAIL ROTOR CONTROL BRIDGE ZOOM 400

010.4441.42
15.6 €
MAIN ROTOR SHAFT



MAIN ROTOR SHAFT ZOOM 400

010.4441.22
8.6 €
TAIL DRIVING SHAFT



TAIL DRIVING SHAFT WITH BEVEL GEAR ZOOM 400

010.4441.112
5.4 €
ZOOM 400 SKIN TUBE



ZOOM 400 SKIN TUBE

010.4441.06
8.2 €
TAIL ROTOR BLADE



TAIL ROTOR BLADE 2PCS

010.4441.02
10 €
ZOOM 400 BLADES



ZOOM 400 BLADES

010.4441.01
30 €
MOTEUR ANTICOUPLE



MOTEUR ANTICOUPLE(MINICOPTER)

020.RC2032
13.3 €
BLADES MINICOPTER



PALES DE ROTOR PRINCIPALE(MINICOPTER)

020.RC2019
21.7 €
BELL 47 G



MICRO HELICOPTERE GRAUPNER BELL 47 G INDOOR 41 MHZ

NEW VERSION WITH TWO MOTOR IN FRONT.
The "micro 47G indoor" miniature electric helicopter is a fully-featured, untethered model controlled using a four-function FM radio control system, and designed for indoor flying. The model features two co-axial contra-rotating rotors and therefore requires no tail rotor; its outstanding feature is its unsurpassed stability in the air. This means that it can be mastered quickly,and requires only a relatively short period of practice.
Pack contents
Completely factory-assembled model with decals applied, already test-flown; including motors, servos, speed controller, gyro, Li-Po battery and charger (12 V) and FM transmitter.

Specifications :
Length : 360 mm
Height : 180 mm
Width : 100 mm
Main rotor : Ø 340 mm
Weight : 210 g
Radio : FM 4-channel
Power supply : Li-Po battery, 7.4 V / 800 mAh
010.4491.41