|
 | LIPO BALANCER PLUS |  |
LIPO BALANCER PLUS GRP
The LiPo Balancer plus provides protection against overcharge and deep-discharge, and is an excellent safety device for every modeller. If you are aiming at maximum safety and the longest possible useful life of your batteries, this unit is a "must-buy" item, as it reliably prevents individual cells being overcharged.
- Max Charge/Discharge 10 A.
- Size env. 85 x 45 x 18 mm.
- Weight, env. 70 g.
|
|
| MX 16 | |
MX 16 41 MHZ RADIO CONTROL SYSTEM
New Graupner MX 16 radio control system
Product information
High-technology micro-computer radio control system with new high-speed single-chip micro-computer, flash memory and 10-bit A/D converter.
A computer radio control system with twelve model memories. Simplified,straight forward programming technique using rockers and momentary buttons. The high-contrast graphic screen provides an efficient means of monitoring set-up parameters, operating modes, timers and battery voltage.
- Modern hardware and integrated Synthesizer system for channel selection, with security menu to guard against setting the wrong frequency accidentally.
- Methods of operation and programming basedon the proven concepts of the mc-19 to mc-24.?- Eight control functions with extremely convenient, simplified method of assigning controls for auxiliary functions such as external switches and proportional controls.
- Unrestricted assignment of all switches to switched functions simply by operating the desired switch.
- Twelve model memories, the latest back-up systemrequiring no Lithium battery.
The sets contain:
mx-16S transmitter with Synthesizer transmitter module on the appropriate frequency band, integral 8NH-1700 mAh 9.6 V NiMH battery, R16SCAN receiver on the appropriate frequency switch harness.
|
|
| ULTRAMAT 10 | |
CHARGER GRP ULTRAMAT 10 220/12V NICD/NIMH 1-10 ELTS /LIPO 1-4 ELTS
Can be used with a 12 15 V car battery or a 230 V / 12 15 V mains PSU = 230 V AC.
Ultra-simple to operate: four-button terminal, clear program structure with user guidance and monitor dialogue.
High-contrast two-line LCD screen displays all relevant charge parameters simultaneously.
Capable of charging 1 ... 10 NiCd / NiMH cells.
Capable of charging 1 ... 4 Li-Po / Li-Io cells.
Charge current 100 mA .... 3 A (10 cells: 2 A).
Delta-Peak Cut-Off detector for NiCd and NiMH cells, variable sensitivity: ensures full charge to 100% capacity.
Capable of charging single cells: ideal for glowplug energiser batteries.
Protected against short-circuit, overload and incorrect polarity.
Ready to use, maintenance-free.
Operating voltage 12 V .... 15 V / 4 A
or 230 V AC mains PSU
Charge capacity 1 ... 10 NiCd / NiMH cells
1 ... 4 Li-Po / Li-Io cells
Charge current 100 mA ... 3 A
Dimensions approx. 160 x 83 x 80 mm
Weight approx. 1333 g
|
|
| ULTRAMAT 12 | |
CHARGER ULTRAMAT 12 GRAUPNER
Ultra-simple operation
Ultra-simple operation based on clearly arranged program structure, 4-button terminal with user guidance and monitor dialogue.
High-contrast two-line LCD screen displays all relevant parameters simultaneously.
Functions can be set to automatic or manual.
Delta-Pe ak cut-off detector for NiCd and NiMH cells; sensitivity can be set separately, ensuring full charges to 100% capacity. Charger can handlesingle cells: ideal for gl ow-start batteries and cell selection processes. Charger can charge 1 ... 3 LiPo cells using the constant current / cons tant voltage method. Declining curve after final charge volt age is reached, withautomatic charge termination. Lead-acid charge programs with optimised charge curve, discharge facility, variable discharge current to determine battery capacity. User settings: this program stores frequently used charge parameters. If the same packs are recharged repeatedly, the charge parameters do not need to be re-programmed. Protected against short-circuit, overload and reversed polarity. Ready to use, maintenance-free.
Specification
Up to 5 A charge current
Charge current: 01 ... 7 A (max. 50 W)
Discharge current: 0.1 ... 1 A
Charge / discharge facilities for: 1 ... 14 NiCd or NiMH cells
1 ... 5 LiPo or Li-Io cells
2, 4, 6, 12 V lead-acid batteries
Product information
A low-cost all-purpose automatic computer-controlled fast charger with programs for discharging, measuring capacity, battery maintenance and pack balancing for most NiCd, NiMH, LiPo and lead-acid batteries commonly used in modelling. Can be powered by a 12 V car battery or a 230 V/12 V DC mains PSU.
|
|
| ULTRAMAT 14 | |
GRP ULTRAMAT 14 CHARGER 220/12V NICD/NIMH 1-14 ELTS /LIPO 1-5 ELTS
Reasonably priced computer-controlled universal fast charger with integral lightweight switch-mode mains PSU. Suitable for 1 ... 14 NiCd / NiMH cells or 1 ... 5 LiPo or LiIo cells, as used in modelling. Can be connected to a 12 ... 15 V car battery or 100 - 240 V AC mains supply. The charger is a development of the proven and highly popularULTRAMAT 10, and is an excellent choice for use overseas (USA / Japan). For optimum safety and a long useful life of your LiPo and LiIo batteries, the LiPo Balancer plus, Order No. 3064, must be used.
- Ultra-simple to operate with its clearly arranged program structure and four-button terminal, with user guidance and monitor dialogue
- High-contrast two-line LCD screen displays all relevantparameters, including current, voltage, charge time, charged-in capacity
- Charges 1 ... 14 NiCd / NiMH cells
- Charges 1 ... 5 LiPo / LiIo cells
- Charge current 100 mA ... 5 A (max. 50 W)
- Delta-Peak cut-off detector for NiCd and NiMH cells, variable sensitivity for reliable full charges to 100% capacity
- Can charge single cells, therefore ideal for glowplug energizer batteries
- Attractive carbon fibre-look finish
Specification
Operating voltage: 12 ... 15 V / 5 A DC or 100 ... 240 C AC mains supply
Cell counts: 1 ... 14 NiCd / NiMH cells, 1 ... 5 LiPo / LiIo cells
Charge current : 100 mA ... 5 A
Dimensions approx. 150 x 127 x 48 mm
Weight excl. mains cable approx. 500 g
|
|
| ULTRAMAT 15 | |
ULTRAMAT 15 220/12V NICD/NIMH 1-15 ELTS /LIPO 1-5 ELTS
Description
- Low-cost computer-controlled universal fast battery charger
- With integral lightweight switch-mode mains PSUfor 100 ... 240 V and 12 DC input. This makes the charger ideal for all "mobile" usage and also for use abroad (USA / Japan).
- Automatic charge, discharge, capacity measurement, battery maintenance and balancing program for NiMH and NiCd batteries as used in modelling.
- Ultra-simple to operate with a clearly arranged program structure and four buttons
- High-contrast two-line LCD screen with blue backlighting for simultaneous display of all relevant parameters.
- Charge / discharge facilities for NiMH, NiCd, LiPo and lead-acid batteries
- Delta-Peak cut-off detector for NiMH and NiCd cells with variable Delta-Peak voltage, guaranteeing reliable full charging to 100% capacity.
- Capable of charging single cells: ideal for glow energizerbatteries and for cell selection
- LiPo and Li-Io cells are charged using the constant current / constant voltage method. Declining current curve when the final charge voltage is reached; automatic charge termination.
- Lead-acid charge programs with optimised charge curve, discharge facility, variable discharge current for determining battery capacity and residual capacity.
- Protected against short-circuit, overload and reversed polarity.
- Ready for use
Specification
Operating voltage:
12 ... 15 V / 85 A DC or 100 ... 230 V AC mains supply
Charge facilities :
1 ... 14 NiMH / NiCd cells
1 ... 5 LiPo cells
1 ... 6 lead-acid cells
Charge current:
0.1 A ... 8 A with mains PSU (max. 50 W)
0.1 A ... 8 A with 12 ... 15 V DC power (80 W)
Discharge current approx. 0.1 ... 5 A (20 W)
Dimensions approx. 168 x 164 x 55 mm
Weight excl. mains lead approx. 770 g
|
|
| TURBO LADER 12 PB | |
AUTOMATIC TURBO LADER 12 PB CHARGER
Charger for 12 V lead-acid batteries
with a capacity of 6 ... 40 Ah.
For 12 V drive and starter batteries. storage.
Ready to connect, complete with battery clips
LED operating and charge monitor display
Short-circuit and overload ,reverse polarity protection
Mains input 230 V~/50 Hz
Output for 12 V lead-acid batteries
Charge current approx. 1.8 A
Trickle charge approx. 100 mA at 14.7 V
Battery size 6 ... 40 Ah
Weight approx. 1280 g
Dim 140 x 100 x 80 mm
|
|
| F15 PAINTED | |
F15 GWS WITH BRUSHLESS/TURBINES AND MOTORS- PEINT
The model is delivered with the 2 EDF 64 fans and Inline brushless motors 2028 type.
Delivered already painted
Specifications :
Length : 1050 mm
Wing Span : 900 mm
Wing Area : 23,9 dm²
Weight : 850-1000g
power system : 2X 2028 inline nrushless
Wing Loading : 37g/dm
Battery Required : 3S 1800/2000 Radio Required : 4 Channel radio
|
|
| F4U CORSAIR ONLY | |
CORSAIR F4U GWS WITHOUT MOTOR - NO PAINTED
The model is delivered without motor and not painted
Specifications :
Length : 727 mm
Wing Span : 901 mm
Wing Area : 15 dm²
Weight : 350-450g
power system : for Booster B101200L
Wing Loading : 20.5-26,3g/dm²
Propeller : APC 9X3,8
Battery Required : 3S 1050/1350 Radio Required : 4 Channel radio
|
|
| FW 190 PAINTED | |
FW 190 GWS WITHOUT ENGINE PAINTED
The model is delivered without motor and painted
Specifications :
Length : 830 mm
Wing Span : 1012 mm
Wing Area : 17,2 dm²
Weight : 350-450g
power system : for Booster B101200L
Wing Loading : 20.5-26,3g/dm²
Propeller : EAPC 9X3,8
Battery Required : 3S 1050/1350 Radio Required : 4 Channel radio
|
|
| FW 190 ONLY | |
FW 190 GWS WITHOUT ENGINE
The model is delivered with no paint and no motor
Specifications :
Length : 830 mm
Wing Span : 1012 mm
Wing Area : 17,2 dm²
Weight : 350-450g
power system : for Booster B101200L
Wing Loading : 20.5-26,3g/dm²
Propeller : EAPC 9X3,8
Battery Required : 3S 1050/1350 Radio Required : 4 Channel radio
|
|
| ME 109 ONLY | |
ME 109 GWS WITHOUT MOTOR - NOT PAINTED
The model is delivered without motor and painted
Specifications :
Length : 758 mm
Wing Span : 900 mm
Wing Area : 13,6 dm²
Weight : 320-410g
power system : for Booster B101200L
Wing Loading : 27g/dm²
Propeller : APC 9X3,8
Battery Required : 3S 1050/1350 Radio Required : 4 Channel radio
|
|
| ME 262 WITH TURBINES | |
ME 262 GWS WITH TURBINE EDF64 -300H ENV 1050 MM NO PAINT
The ME 262 GWS is a famous repliqua of the famous WW2 airplane.
The foam model, delivered unpainted is ready to fly in a couple of hours.The fuselage has been prepared for easy installation of electronics and rc components. The ME 262 is propelled by EDF64-300H turbines. tyres and wheels, canopy and all the small necessary parts to finish the kit are included.
The model is delivered without motor and painted
Specifications :
Length : 842 mm
Wing Span : 1050 mm
Wing Area : 17 dm²
Weight : 790 g
power system : EDF64 -300H X2
Wing Loading : 46g/dm²
Battery Required : 8 cells 1400 mA or 3S 2000 for brushless
Radio Required : 4 Channel radio
|
|
| P38 LIGHTNING WITH MOTORS | |
P38 LIGHTNING GWS WITH EPS 300 ENV 1200 MM - NO PAINT
The P38 GWS is a famous repliqua of the famous WW2 airplane.
The foam model, delivered unpainted is ready to fly in a couple of hours.
The fuselage has been prepared for easy installation of electronics and rc components. The P38 is propelled by EPS300 motors. tyres and wheels, canopy and all the small necessary parts to finish the kit are included.
The model is delivered without motor and painted
Specifications :
Length : 853 mm
Wing Span : 1200 mm
Wing Area : 19,9 dm²
Weight : 720 g
power system : EPS300 or Booster B101200L
Wing Loading : 37g/dm²
Propeller : 8x4,3 or 9x4,7
Battery Required : 8 cells 1050 mA or 3S 1050/1350 for brushless
Radio Required : 4 Channel radio
|
|
| P 40 KITTYHAWK ONLY | |
P40 GWS WITHOUT MOTOR - NO PAINTED
The model is delivered without motor and painted
Specifications :
Length : 841 mm
Wing Span : 1000 mm
Wing Area : 17,6 dm²
Weight : 550-650g
power system : for Booster B101200L
Wing Loading : 37g/dm²
Propeller : APC 9X3,8
Battery Required : 3S 1050/1350 Radio Required : 4 Channel radio
|
|
| P51 D MUSTANG ONLY | |
P51D MUSTANG GWS WITHOUT MOTOR - AVION NON PEINT
The model is delivered without motor and not painted
Specifications :
Length : 737 mm
Wing Span : 870 mm
Wing Area : 13,2 dm²
Weight : 340-400g
power system : for Booster B101200L
Wing Loading : 20.5-26,3g/dm²
Propeller : EAPC 9X3,8
Battery Required : 3S 1050/1350 Radio Required : 4 Channel radio
|
|
| SPITFIRE ONLY | |
SPITFIRE GWS - WITHOUT MOTOR NOT PAINTED
The model is delivered without motor and painted
Specifications :
Length : 720 mm
Wing Span : 876 mm
Wing Area : 13,8 dm²
Weight : 390-440g
power system : for Booster B101200L
Wing Loading : 29g/dm²
Propeller : APC 9X3,8
Battery Required : 3S 1050/1350 Radio Required : 4 Channel radio
|
|
| SIM02/FMS SIMULATOR | |
FMS WITH TRANSMITTER
Transmitter delivered with USD plug and FMS simulator. this transmitter can also be used with other brands of simulator.
|
|
| CULARIS | |
CULARIS MULTIPLEX - ELECTRO GLIDER - SPAN 2610MM
The EasyGlider was the first step for many modellers into the world of model gliding
and thermals, and now we present the logical development and next step: the Cularis.
• Minimal cost
• Minimal building effort
• Minimal risk of breakage thanks to robust ELAPOR® foam
• Four-fl ap wing: camber-changing fl aps and butterfl y (crow) / landing aid function
• Optional electric power set with ample power
• Broad performance spectrum, including aerobatics and thermalling
• Wide speed range
The Cularis can be built as a glider or electric glider.
For the electric version we recommend the dedicated power set, # 33 2633. With the
recommended battery this power system provides 6 to 8 climbs to around 150 m on a
single charge. If you want more power, simply fi t a larger propeller (e.g. 12 x 8” or 13.5
x 7”); this gives a better rate of climb at the cost of reduced motor run times.
The set also includes a glider nose cone in which an optional aero-tow coupling can
be installed. The model can then be fl own as a glider and launched by aero-tow. Our
MAGISTER makes a great tug for the Cularis
Cularis - an ideal model for weekend and club pilots
Innovative features:
• The mechanical retainer system engages automatically when the wings are
plugged in; at the same time the servos are connected electrically, eliminating the
tedious task of connecting the wing-mounted servos.
• The all-moving tailplane is also removable, with an automatic retainer system.
Design features:
• Two carbon wing spars for ample strength
• Like the all-moving tailplane, the wings can be unlocked and removed very simply, making transport straightforward
• GRP reinforcements in the fuselage and tailplane
• Polycarbonate fuselage nose reinforcement
• Wing-mounted servos covered by protective fairings
• All the electronic components have a pre-defi ned position in the model.
Kit contents:
Moulded ELAPOR components
CFRP and GRP spars
Injection-moulded parts including motor bulkhead
Small items and linkage components
Decal sheet
Comprehensive illustrated building instructions
Specifi cation:
Wingspan: 2610 mm
Fuselage length: 1260 mm
All-up weight: glider
approx. 1400 g electric, with rec. power set approx. 1680 g
Wing area (FAI): approx. 55 dm²
Wing loading (FAI): approx. 27 g / dm²
Functions: Elevator, rudder, aileron and butterfl y (crow)
Electric version needs throttle
|
|
| TWISTER JET | |
MPX TWISTER JET MODEL SPAN 850 MM
The new jet TWISTER from MPX is avaible now.
Packed in a shipping box to preserve the parts during shipping, all the parts are molded in elapor, EPP foam type.
Fan and brushless inrunner motor are supplied in the set; You will have too 2 sheets of decor sheme and building construction manual.
Technical characteristics
Span: 850 mm
Length: 1170 mm
Wing aera: 25,5 dm2
Weight 900 gr
|
|
| FUNJET MOTOR | |
HIMAX A2825-2700
the "Hot" brushless motor for the funjet or similar speed flying model.
Kv 2700
use with GRP 4,7 x 4,7 prop or APC 5,5 x 4,5
Shaft 3,17 mm
|
|
| MULTIPRIMER EPP | |
MULTIPRIMER EPP AND ELAPOR
Until now it has been almost impossible to paint ELAPOR® or EPP foam, as the paint soon flakes off. MULTIprimer finally offers the key:
once applied, the primer forms the basis for an enduring colour finish with many types of paint. We have had particularly good results on foam with matt synthetic enamels, available in spraycan form from any DIY store.
|
|
| BANDE ADHESIVE | |
BANDE ADHESIVE CHARNIERE 10M
Hinge tape. Clear hinge tape, strong and UV-stable 10 m roll, 19mm wide.
|
|
| EP 1500 EM | |
BATTERY PACK NIMH 1500 MAH EP1500 QUANTITY=NUMBER OF CELLS
Capacity 1500 mA
Assembled cells. Please indicate the number of cells and type of pack.
4 and 5 cells packs are delivered with universal JR plug.
packs of more than 5 cells are delivered with high quality silicone 1,5 mm2 wires.
|
|
| EP 2000 EM | |
BATTERY PACK NIMH 2000 MAH EP2000 QUANTITY=NUMBER OF CELLS
Capacity 2000 mA
Assembled cells. Please indicate the number of cells and type of pack.
4 and 5 cells packs are delivered with universal JR plug.
packs of more than 5 cells are delivered with high quality silicone 2,5 mm2 wires.
|
|
| EP 3000 EM | |
BATTERY PACK NIMH 3000 MAH EP3000 QUANTITY=NUMBER OF CELLS
Capacity 3000 mA
Assembled cells. Please indicate the number of cells and type of pack.
4 and 5 cells packs are delivered with universal JR plug.
packs of more than 5 cells are delivered with high quality silicone 2,5 mm2 wires.
|
|
| EP 3600 EM | |
BATTERY PACK NIMH 3600 MAH EP3600 QUANTITY=NUMBER OF CELLS
Capacity 3600 mA
Assembled cells. Please indicate the number of cells and type of pack.
4 and 5 cells packs are delivered with universal JR plug.
packs of more than 5 cells are delivered with high quality silicone 2,5 mm2 wires.
|
|
| EP 4600 EM | |
BATTERY PACK NIMH 4600 MAH EP4600 QUANTITY=NUMBER OF CELLS
Capacity 4600 mA
Assembled cells. Please indicate the number of cells and type of pack.
4 and 5 cells packs are delivered with universal JR plug.
packs of more than 5 cells are delivered with high quality silicone 2,5 mm2 wires.
|
|
| 30 MM FOLDING PROP SPINNER | |
30 MM FOLDING PROP SPINNER
Spinner diameter 30 mm
For 3,2 mm shaft
For 6 mm blade
|
|
| 20MM | |
ROUE MOUSSE ULTRA LEGERE 20 MM (1 PC)
The best wheels when we want to track grams on indoors or small models.
Weight : 0,8 g both !
|
|
| ARCUS MOTORSET | |
ARCUS MOTORSET
Kit contents:
1 Roxxy BL-Outrunner 2827-26
1 controlleur Roxxy BL-control 818
1 Lipo battery. 3S1P 11.1V 1150mAh
1 CFRP falding propeller 9,5x5 with spinner
All connections factory-soldered.
|
|
| ALU SPINNER 45 MM | |
ROBBE 2 BLADES ALU SPINNER DIAM 45 MM
|
|
| INFINTY 3 ROBBE CHARGER | |
INFINITY 3 ROBBE CHARGER
High performance charger for NiCd, NiMh, Pb and lipo battery.
Up to 30 cells Cd-Ni/NiMH, 12 cells lipo.
Max charge at 10 amps
|
|
| POWER PEAK COMPACT | |
ROBBE POWER PEAK COMPACT NICD/NIMH 1-14 ELTS /LIPO 1-3 ELTS SYSTEME BID CHARGER
Clear display of charge parameters and battery data on the large, backlit 2 x 16 character LCD screen.
The Compact 12 V charger can also be operated from the mains if it is connected to the SPS 100 - 240 V 5 A mains power supply, No. 8485
If a Top Equalizer 6S (No. 8488) is connected, the individual cells in the LiPo pack are brought to the same voltage level, and at the same time the individual cell voltages are displayed on the LCD screen.
Functions:
Charge
Discharge
Cycle
1 ... 5 x discharge - charge
1 ... 5 x charge - discharge
Display of charge and discharge time
Display of charged-in and discharged capacity
Display of charge voltage
Variable charge / discharge current and cell count.
NC / NiMH batteries
1 ... 14 cells
T
he automatic digital Delta Peak cut-off circuit switches off the charge process at the correct time, and is designed to suit both NC and NiMH batteries.
Lithium / LiPo batteries
1 ... 5 cells
Display of individual cell voltages in LiPo batteries if a TOP Equalizer 6S (No. 8488) is used.
Automatic charge cut-off using CC-CV charge process, which terminates the charge at a final voltage of 4.2 Volts per cell.
Lead-acid batteries
1 ... 6 cells (2 ... 12 Volt)
Automatic charge cut-off using CC-CV charge process, which terminates the charge at a final voltage of 2.35 Volts per cell.
Specification:
Input voltage: 10...15 Volt-DC oder 100-240 V AC mit Netzteil
Charge termination: automatisch
Trickle charge: 200 mA
Dimensions: 140 x 108 x 52 mm
Charge current: 0.1...5 A (max. 50 W) A
No. of NC cells: 1...14 NC/NiMH 1...5 Lithium (3.6V) oder LiPO (3.7V) 1...6 PB/Blei
|
|
| 2,5 MM2 | |
FIL SILICONE MULTIBRINS 2,5 MM2 (1 M ROUGE/1 M NOIR)
|
|
| 4 MM2 | |
FIL SILICONE MULTIBRINS 4 MM2 (1 M ROUGE/1 M NOIR)
|
|
| MIG 15 | |
MIG 15 ALFA MODEL ENV 750MM
Span: 750 mm
Lenght: 740 mm
Surface: 12,8 dm2
Weight: 470 gr
|
|
| F86 SABRE | |
F86 SABRE ALFA MODEL ENV 750MM
Span: 750 mm
Lenght: 750 mm
Surface: 13 dm2
Weight: 470 gr
|
|
| LAVOTCHKIN LA-7 | |
LAVOTCHKIN LA-7 ALFA MODEL ENV 840MM
Span: 840 mm
Lenght: 730 mm
Surface: 12,9 dm2
Weight: 430 gr
Motor: Booster B101200L
Controller: Simply 18
|
|
| F4U-1 CORSAIR | |
F4U-1 CORSAIR ALFA MODEL ENV 810MM
Span: 810 mm
Lenght: 650 mm
Surface: 12,1 dm2
Weight: 420 gr
Motor: Booster B101200L
Controller: Simply 18
|
|
| P51D MUSTANG | |
P51D MUSTANG ALFA MODEL ENV 850MM
Span: 850 mm
Lenght: 710 mm
Surface: 12,4 dm2
Weight: 420 gr
Motor: Booster B101200L
Controller: Simply 18
|
|
| F4F WILDCAT | |
F4F WILDCAT ALFA MODEL ENV 830MM
Span: 830 mm
Lenght: 620 mm
Surface: 12,5 dm2
Weight: 430 gr
Motor: Booster B101200L
Controller: Simply 18
|
|
| SPITFIRE MK VB | |
SPITFIRE MK VB ALFA MODEL ENV 820MM
Span: 820 mm
Lenght: 790 mm
Surface: 12 dm2
Weight: 430 gr
Motor: Booster B101200L
Controller: Simply 18
|
|
| FOCKE WULF FW190 A-8 | |
FOCKE WULF FW190 A-8 ALFA MODEL ENV 850MM
Span: 850 mm
Lenght: 730 mm
Surface: 12 dm2
Weight: 430 gr
Motor: Booster B101200L
Controller: Simply 18
|
|
| JET RANGER BODY | |
JET RANGER SCALE BODY FOR BELL 47G
You want to change the look of your Bell 47G. This body fit perfectly to the original fuselage.
Very light Jet Ranger fuselage
Length : 420 mm
Height : 90 mm
Wigth : 80 mm
Weight : 35gr
|
|
| INDOOR SWISS LAMA | |
INDOOR SWISS LAMA BMI COMPLETE SET
NEW VERSION 7.0
The "micro SWISS LAMA indoor" miniature electric helicopter is a fully-featured, untethered model controlled using a four-function FM radio control system, and designed for indoor flying. The model features two co-axial contra-rotating rotors and therefore requires no tail rotor; its outstanding feature is its unsurpassed stability in the air. This means that it can be mastered quickly,and requires only a relatively short period of practice.
Pack contents
Completely factory-assembled model with decals applied, already test-flown; including motors, servos, speed controller, gyro, Li-Po battery and charger (12 V) with balance charge and FM transmitter.
1000 mAh battery for very long flights
Specifications :
Length : 380 mm
Height : 180 mm
Width : 100 mm
Main rotor : Ø 340 mm
Weight : 240 g
Radio : FM 4-channel
Power supply : Li-Po battery, 7.4 V / 1000 mAh with lipo balancer
|
|
| APACHE AH-64 INDOOR | |
MICRO HELICOPTERE APACHE AH-64 BMI INDOOR MODE 1
The AH-64 Apache is the United States Army’s principal attack helicopter, and is the successor to the AH-1 Cobra. The Apache is a double seated helicopter (Co-pilot in front, Pilot in the back). Two turbines of 1660 HP each can power the helicopter to horizontal speeds of 365Km/h.
This R/C version of the Apache is an electric helicopter with two co-axial counter rotating Rotors. Thanks to it’s many details like the landing gear with wheels, bombs and rocket, this Apache Combat really stands out of the crowd. The Apache is based on the same mechanics as the “Swiss Lama v7.1” and has the same stable flight characteristics. The Apache shares most of it’s spare parts with the Swiss Lama.
Technical specifications
Charger Yes
Controlbox 4in1
Diameter Rotor 340 mm
Fly Time 8~12 min.
In-/Outdoor Indoor
Length 370 mm
LiPo cell(s) 7,4V 1000
Model Apache Combat 7.1 compl. set
Motor 180SHX (x2)
Servo(s) 2
System FP
System Co-axial
Tx RC-4
Weight 210 g
|
|
| MIRAGE 2000 COMBO | |
MIRAGE 2000 BLACK COLOR WITH MOTOR AND CONTROLLER
Fantastic flying repliqua of the French Mirage 2000 jet airplane.
the model is already finsihed with his color sheme. The gear is already in place, the turbine is included with the inline brushless motor and the 25 Amps controller.
really a good bargain for testing electro power turbine.
Good flights and fighting!
Span: 622 mm
Lenght: 970 mm
Weight: 0,52 Kg
Surface: 22 dm2
|
|
| ELBATROS GLIDER COMBO | |
ELBATROS BMI ENV 1930 MM COMBO COMPLETE
The Elbatros has been designed for electroflight, and is extremely suited for beginning and intermediate pilots.
Very easy to build. only the stabiliser need to be assembled. Glueing is restri | | 
